目录

1. System Requirements​

First, confirm that your hardware is Phytium D2000/FT2000.

  • Operating System: Galaxy Kylin V10 (SP1) versions 2203 and 2303, also supported on ARM64 architecture.

  • Kernel: linux-5.4.18-53 and above.

  • Graphics：AMD Radeon

  • Storage：Minimum 8GB. Recommended 16GB or higher

2. Configure Installation Source And Certificates（Optional）​

When installing OpenFDE for the first time, you will need to obtain the complete software source and configure the installation source and certificates.

Note: If this is not your first time installing OpenFDE, you can skip the "Configure Installation Source and Certificates" section and proceed directly to the Install OpenFDE​

2.1 Install wget and gpg​

1sudo apt-get install wget gpg

2.2 Download the encryption key file from the official website and decrypt it locally​

1wget -qO- http://openfde.com/keys/openfde.asc | gpg --dearmor > packages.openfde.gpg

2.3 Copy the decrypted key file to the key folder of your local apt tool​

1sudo install -D -o root -g root -m 644 packages.openfde.gpg /etc/apt/keyrings/packages.openfde.gpg

2.4 Configure the software repository address for OpenFDE​

1sudo echo \ 2 "deb [arch="$(dpkg --print-architecture)" signed-by=/etc/apt/keyrings/packages.openfde.gpg] http://openfde.com/repos/ubuntu/ \ 3 "$(. /etc/os-release && echo "$PROJECT_CODENAME")" main" | \ 4 sudo tee /etc/apt/sources.list.d/openfde.list > /dev/null

2.5 Delete the downloaded key file​

1rm -f packages.openfde.gpg

3. Install OpenFDE
锚
​​

3.1 Update Software Source​

1sudo apt-get update

3.2 Install OpenFDE​

1sudo apt-get install openfde

4. Upgrade OpenFDE​

Firstly update the software source.

1sudo apt-get update

Upgrade OpenFDE to the latest version.

1sudo apt-get install openfde